Disinfecting Wipes

Cleans and disinfects in one easy step

Disinfectant Wipes
BUY NOW
  • Eliminates dirt and soils
  • Won’t leave greasy residue on hands
  • Clear drying formula for multiple surfaces

Use on hard, nonporous surfaces: plastic, vinyl upholstery, metal, glass and painted surfaces.

Armor All® Disinfecting Wipes are effective against:
- *Influenza Type A Virus / Brazil, the Flu Virus – Norwalk Virus (Norovirus) – Staphylococcus aureus (Staph) – Salmonella enterica (Salmonella) – Escherichia coli (E. coli)

Where to Use

  • Plastic
  • Vinyl Upholstery
  • Metal
  • Glass
  • Painted Surfaces

Usage Directions

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

To Clean and Deodorize: Wipe surface with wipe. Let air dry. Discard used wipe in trash. Do not flush in toilet.

To Clean and Disinfect / Virucidal* Directions: Wipe surface with wipe until surface is visibly wet. Allow surface to remain wet for 10 minutes. Let air dry. If surfaces are extremely dirty, clean first with another wipe before disinfecting. Discard used wipe in trash. Do not flush in toilet.

Sanitizing: To sanitize hard, nonporous, nonfood contact surfaces, wipe surface, using enough wipes to allow treated surface to remain wet for 15 seconds for Staphylococcus aureus (ATCC 6538), Klebsiella pneumoniae (ATCC 4352) and Campylobacter jejuni (ATCC 29428). Let surface dry. For highly soiled surfaces, clean excess dirt first. For plastic and painted surfaces, spot test on an inconspicuous area before use.

TO OPEN PACKAGE:

  1. Open lid and pull out wipe from center of roll.
  2. The next sheet pops up automatically.
  3. When finished, closed lid to retain moisture.

Available Sizes

15ct. and 25ct.

Original Protectant

Cleans, protects and helps
keep surfaces looking like new

Original Protectant
BUY NOW
  • Eliminates dirt and soils
  • Won’t leave greasy residue on hands
  • Clear drying formula for multiple surfaces

Use on hard, nonporous surfaces: plastic, vinyl upholstery, metal, glass and painted surfaces.

Armor All® Disinfecting Wipes are effective against:
- *Influenza Type A Virus / Brazil, the Flu Virus – Norwalk Virus (Norovirus) – Staphylococcus aureus (Staph) – Salmonella enterica (Salmonella) – Escherichia coli (E. coli)

Where to Use

  • Plastic
  • Vinyl Upholstery
  • Metal
  • Glass
  • Painted Surfaces

Usage Directions

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

To Clean and Deodorize: Wipe surface with wipe. Let air dry. Discard used wipe in trash. Do not flush in toilet.

To Clean and Disinfect / Virucidal* Directions: Wipe surface with wipe until surface is visibly wet. Allow surface to remain wet for 10 minutes. Let air dry. If surfaces are extremely dirty, clean first with another wipe before disinfecting. Discard used wipe in trash. Do not flush in toilet.

Sanitizing: To sanitize hard, nonporous, nonfood contact surfaces, wipe surface, using enough wipes to allow treated surface to remain wet for 15 seconds for Staphylococcus aureus (ATCC 6538), Klebsiella pneumoniae (ATCC 4352) and Campylobacter jejuni (ATCC 29428). Let surface dry. For highly soiled surfaces, clean excess dirt first. For plastic and painted surfaces, spot test on an inconspicuous area before use.

TO OPEN PACKAGE:

  1. Open lid and pull out wipe from center of roll.
  2. The next sheet pops up automatically.
  3. When finished, closed lid to retain moisture.

Available Sizes

15ct. and 25ct.

Air Freshening Protectant

Refresh Your Car’s Interior While Also Preserving Its Rich Look

Air Freshening Protectant
BUY NOW
  • Eliminates dirt and soils
  • Won’t leave greasy residue on hands
  • Clear drying formula for multiple surfaces

Use on hard, nonporous surfaces: plastic, vinyl upholstery, metal, glass and painted surfaces.

Armor All® Disinfecting Wipes are effective against:
- *Influenza Type A Virus / Brazil, the Flu Virus – Norwalk Virus (Norovirus) – Staphylococcus aureus (Staph) – Salmonella enterica (Salmonella) – Escherichia coli (E. coli)

Where to Use

  • Plastic
  • Vinyl Upholstery
  • Metal
  • Glass
  • Painted Surfaces

Usage Directions

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

To Clean and Deodorize: Wipe surface with wipe. Let air dry. Discard used wipe in trash. Do not flush in toilet.

To Clean and Disinfect / Virucidal* Directions: Wipe surface with wipe until surface is visibly wet. Allow surface to remain wet for 10 minutes. Let air dry. If surfaces are extremely dirty, clean first with another wipe before disinfecting. Discard used wipe in trash. Do not flush in toilet.

Sanitizing: To sanitize hard, nonporous, nonfood contact surfaces, wipe surface, using enough wipes to allow treated surface to remain wet for 15 seconds for Staphylococcus aureus (ATCC 6538), Klebsiella pneumoniae (ATCC 4352) and Campylobacter jejuni (ATCC 29428). Let surface dry. For highly soiled surfaces, clean excess dirt first. For plastic and painted surfaces, spot test on an inconspicuous area before use.

TO OPEN PACKAGE:

  1. Open lid and pull out wipe from center of roll.
  2. The next sheet pops up automatically.
  3. When finished, closed lid to retain moisture.

Available Sizes

15ct. and 25ct.

Natural Finish Detailer Protectant
BUY NOW
  • Eliminates dirt and soils
  • Won’t leave greasy residue on hands
  • Clear drying formula for multiple surfaces

Use on hard, nonporous surfaces: plastic, vinyl upholstery, metal, glass and painted surfaces.

Armor All® Disinfecting Wipes are effective against:
- *Influenza Type A Virus / Brazil, the Flu Virus – Norwalk Virus (Norovirus) – Staphylococcus aureus (Staph) – Salmonella enterica (Salmonella) – Escherichia coli (E. coli)

Where to Use

  • Plastic
  • Vinyl Upholstery
  • Metal
  • Glass
  • Painted Surfaces

Usage Directions

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

To Clean and Deodorize: Wipe surface with wipe. Let air dry. Discard used wipe in trash. Do not flush in toilet.

To Clean and Disinfect / Virucidal* Directions: Wipe surface with wipe until surface is visibly wet. Allow surface to remain wet for 10 minutes. Let air dry. If surfaces are extremely dirty, clean first with another wipe before disinfecting. Discard used wipe in trash. Do not flush in toilet.

Sanitizing: To sanitize hard, nonporous, nonfood contact surfaces, wipe surface, using enough wipes to allow treated surface to remain wet for 15 seconds for Staphylococcus aureus (ATCC 6538), Klebsiella pneumoniae (ATCC 4352) and Campylobacter jejuni (ATCC 29428). Let surface dry. For highly soiled surfaces, clean excess dirt first. For plastic and painted surfaces, spot test on an inconspicuous area before use.

TO OPEN PACKAGE:

  1. Open lid and pull out wipe from center of roll.
  2. The next sheet pops up automatically.
  3. When finished, closed lid to retain moisture.

Available Sizes

15ct. and 25ct.

Protectant Gel

Our Strongest Protection Available!

Protectant Gel
BUY NOW
  • Eliminates dirt and soils
  • Won’t leave greasy residue on hands
  • Clear drying formula for multiple surfaces

Use on hard, nonporous surfaces: plastic, vinyl upholstery, metal, glass and painted surfaces.

Armor All® Disinfecting Wipes are effective against:
- *Influenza Type A Virus / Brazil, the Flu Virus – Norwalk Virus (Norovirus) – Staphylococcus aureus (Staph) – Salmonella enterica (Salmonella) – Escherichia coli (E. coli)

Where to Use

  • Plastic
  • Vinyl Upholstery
  • Metal
  • Glass
  • Painted Surfaces

Usage Directions

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

To Clean and Deodorize: Wipe surface with wipe. Let air dry. Discard used wipe in trash. Do not flush in toilet.

To Clean and Disinfect / Virucidal* Directions: Wipe surface with wipe until surface is visibly wet. Allow surface to remain wet for 10 minutes. Let air dry. If surfaces are extremely dirty, clean first with another wipe before disinfecting. Discard used wipe in trash. Do not flush in toilet.

Sanitizing: To sanitize hard, nonporous, nonfood contact surfaces, wipe surface, using enough wipes to allow treated surface to remain wet for 15 seconds for Staphylococcus aureus (ATCC 6538), Klebsiella pneumoniae (ATCC 4352) and Campylobacter jejuni (ATCC 29428). Let surface dry. For highly soiled surfaces, clean excess dirt first. For plastic and painted surfaces, spot test on an inconspicuous area before use.

TO OPEN PACKAGE:

  1. Open lid and pull out wipe from center of roll.
  2. The next sheet pops up automatically.
  3. When finished, closed lid to retain moisture.

Available Sizes

15ct. and 25ct.

Ultra Shine Protectant

The Ultimate High-Gloss Shine From The Most Trusted Name in Car Care

Ultra Shine Protectant
BUY NOW
  • Eliminates dirt and soils
  • Won’t leave greasy residue on hands
  • Clear drying formula for multiple surfaces

Use on hard, nonporous surfaces: plastic, vinyl upholstery, metal, glass and painted surfaces.

Armor All® Disinfecting Wipes are effective against:
- *Influenza Type A Virus / Brazil, the Flu Virus – Norwalk Virus (Norovirus) – Staphylococcus aureus (Staph) – Salmonella enterica (Salmonella) – Escherichia coli (E. coli)

Where to Use

  • Plastic
  • Vinyl Upholstery
  • Metal
  • Glass
  • Painted Surfaces

Usage Directions

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

To Clean and Deodorize: Wipe surface with wipe. Let air dry. Discard used wipe in trash. Do not flush in toilet.

To Clean and Disinfect / Virucidal* Directions: Wipe surface with wipe until surface is visibly wet. Allow surface to remain wet for 10 minutes. Let air dry. If surfaces are extremely dirty, clean first with another wipe before disinfecting. Discard used wipe in trash. Do not flush in toilet.

Sanitizing: To sanitize hard, nonporous, nonfood contact surfaces, wipe surface, using enough wipes to allow treated surface to remain wet for 15 seconds for Staphylococcus aureus (ATCC 6538), Klebsiella pneumoniae (ATCC 4352) and Campylobacter jejuni (ATCC 29428). Let surface dry. For highly soiled surfaces, clean excess dirt first. For plastic and painted surfaces, spot test on an inconspicuous area before use.

TO OPEN PACKAGE:

  1. Open lid and pull out wipe from center of roll.
  2. The next sheet pops up automatically.
  3. When finished, closed lid to retain moisture.

Available Sizes

15ct. and 25ct.