Custom Shield

Spray-on, Peel-off Paint & Body Protection

Custom Shield
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray

Outlast Tire Glaze

Give your tires a durable shine

Outlast Tire Glaze
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray

Tire Foam®

Powerful Cleaning for a Deep Black Look, Trusted Armor All® Protection

Tire Foam®
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray

Ultra Shine Foam

High Gloss Shine & Protection, Powerful Cleaning

Ultra Shine Foam
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray

Extreme Shine Spray

Our Most Extreme Wet, Black Shine! Trusted Armor All Protection

Extreme Shine Spray
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray

Extreme Shine Aerosol

Our Most Extreme, Wet, Black Shine, Trusted Armor All Protection

Extreme Shine Aerosol
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray

Extreme Shine Gel

Our Longest Lasting, Wet Black Shine!

Extreme Tire Shine
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray

Detailers Advantage® Tire Foam®

Cleans, Shines & Protects Tires

Detailers Advantage® Tire Foam®
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray