Custom Shield

Spray-on, Peel-off Paint & Body Protection

Custom Shield
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Outlast Trim & Plastic Restorer

Restores plastic & vinyl like new

Outlast Trim & Plastic Restorer
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Premium Wash & Wax + Protect

Protects against unsightly water marks & spots

Premium Wash & Wax + Protect
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Disinfecting Wipes

Cleans and disinfects in one easy step

Disinfectant Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Outlast Tire Glaze

Give your tires a durable shine

Outlast Tire Glaze
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Tire Foam®

Powerful Cleaning for a Deep Black Look, Trusted Armor All® Protection

Tire Foam®
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Original Protectant Wipes

Protects & Preserves Your Car’s Rich Look

Original Protectant Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Clean Up Wipes

Multi-surface cleaner for spills and messes

Clean-Up Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Ultra Shine Foam

High Gloss Shine & Protection, Powerful Cleaning

Ultra Shine Foam
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Tech & Screen Wipes

Soft wipe designed for cleaning GPS, LCD and other electronic screens

Tech & Screen Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Extreme Shine Spray

Our Most Extreme Wet, Black Shine! Trusted Armor All Protection

Extreme Shine Spray
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Carpet & Upholstery Wipes

Durable wipe for cleaning spots and stains on fabric, carpet and floor mats

Carpet & Upholstery Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Extreme Shine Aerosol

Our Most Extreme, Wet, Black Shine, Trusted Armor All Protection

Extreme Shine Aerosol
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Cleaning Wipes

Cleans All Automotive Surfaces

Cleaning Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Extreme Shine Gel

Our Longest Lasting, Wet Black Shine!

Extreme Tire Shine
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Air Freshening Protectant Wipes

Refreshing Scented Cleaning for All Interior Auto Surfaces

Air Freshening Protectant Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Detailers Advantage® Tire Foam®

Cleans, Shines & Protects Tires

Detailers Advantage® Tire Foam®
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Glass Wipes

Crystal Clear, Streak-Free Shine

Glass Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Leather Wipes

Cleans, Conditions & Protects For That Lasting Luxurious Look

Leather Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Orange Cleaning Wipes

Degreasers Power Through Tough Dirt

Orange Cleaning Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Ultra Shine Wipes

The Ultimate High Gloss Shine & Protection

Ultra Shine Wipes
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Bug Remover

Cleans bug grime and residue to help keep your vehicle looking like new

Bug Remover
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Wheel Protectant

Repels brake dust, road grime and dirt by forming a protective barrier on wheel and rims.

Wheel Protectant
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Wheel & Tire Cleaner

Dissolves grease, road grime & brake dust. Reveals brilliant shine.

Wheel & Tire Cleaner
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Multi-Purpose Auto Cleaner

Powerful Cleaning For All Auto Surfaces From The Most Trusted Name In Car Care

Multi-Purpose Auto Cleaner
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Carpet & Upholstery Cleaner

Cleans The Toughest Automotive Dirt & Grime From The Most Trusted Name in Car Care

Carpet & Upholstery Cleaner
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



OxiMagic™ Carpet & Upholstery Cleaner

Deep Cleans With Powerful Oxygen Action

OxiMagic™ Carpet & Upholstery Cleaner
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Leather Care Protectant

Cleans, Conditions, and Protects For That Lasting, Luxurious Look

Leather Care Protectant
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Leather Care Gel

Cleans, Conditions, and Protects For That Lasting, Luxurious Look

Leather Care Gel
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Air Freshener

Freshen Your Car’s Interior With A Long-Lasting Scent

Air Freshener
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Scented Oil Vent Clip

Freshen Your Car’s Interior With A Long-Lasting Scent

Scented Oil Vent Clip
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Extreme Shield Wax

Can your wax do this?

Extreme Shield Wax
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Spray Detailer

Maintain a just-washed look

Spray Detailer
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Original Protectant

Cleans, protects and helps
keep surfaces looking like new

Original Protectant
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Air Freshening Protectant

Refresh Your Car’s Interior While Also Preserving Its Rich Look

Air Freshening Protectant
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Natural Finish Detailer Protectant
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Protectant Gel

Our Strongest Protection Available!

Protectant Gel
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Glass Cleaner

Crystal Clear, Streak-Free Shine

Glass Cleaner
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Butter Smooth

Trusted Armor All® protection in half the time

Butter Smooth
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Ultra Shine Wash & Wax

Our most advance car wash

Ultra Shine Wash & Wax
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Concentrate

Cleans the toughest automotive dirt & grime

Concentrate
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray



Ultra Shine Protectant

The Ultimate High-Gloss Shine From The Most Trusted Name in Car Care

Ultra Shine Protectant
BUY NOW
  • Protect all painted surfaces, chrome trim, plastic and wheels
    • Defend against paint chips and scratches caused by road debris
    • Stylize your vehicle to give it a distinctive look
    • Easy to apply, easy to remove
    • Scientifically formulated to resist the weather and elements for up to 3 months
  • Customize your protection
    • Protect against bugs, dirt and road debris
    • Create racing stripes
    • Give wheels a new look while protecting against brake dust
  • On average, one can provides coverage for one of the following:
    • Bug bra
    • Stripes
    • Wheels

Application

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

Usage Directions

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

Coverage

Approximately 6-12 sq. ft. per can.

For Best Results

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

Removal

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

Available Colors

  • Black
  • White
  • Clear
  • Gray