Wheel Protectant

Repels brake dust, road grime and dirt by forming a protective barrier on wheel and rims.

Wheel Protectant

Easy to build up and difficult to wash off, brake dust has been the bane of beautiful, shiny wheels since the invention of disc brakes. Simply spray Armor All® Wheel Protectant on clean, dry wheels to repel brake dust, road grime, and dirt. The invisible barrier lasts up to four weeks, keeping your wheels clean from wash to wash.

Usage Directions

  1. Make sure wheels are clean and dry.
  2. Shake can well before use. Liberally spray product over entire wheel (rim). Do not touch wheel after application, as this will remove the protection.
  3. Allow to dry 1 hour. Dry time will vary with the temperature. The longer you let Armor All® Wheel Protectant dry, the better the protection will be. Recommended application in temperatures above 65F

For Best Results

For best results with Armor All® Tire Shine products, apply tire shine before applying Armor All® Wheel Protectant. Remove any overspray from the wheel (or use a rag/applicator sponge to apply the tire shine).

Wheel & Tire Cleaner

Dissolves grease, road grime & brake dust. Reveals brilliant shine.

Wheel & Tire Cleaner

Your wheels are constantly under assault by grease, road grime, and brake dust that get baked on during the intense heat of driving conditions. Our Triple-Action Formula is specifically formulated to attack ALL THREE — grease, road grime, and brake dust — dissolving them to reveal your beautiful, shiny rims.

  • Triple-Action Formula dissolves grease, road grime AND brake dust
  • Intense foaming action clings to wheels and lifts away the most stubborn soils
  • Blanketing agents help formula spread into nooks & crannies to attack tough dirt
  • Safe for wheels when used as directed

Tips & Tricks

Try waxing your wheels. It will minimize brake dust accumulation and make cleaning easier next time!

Attention

Prior to use on motorcycles or uncoated polished aluminum, check with manufacturer. Before use, test on an inconspicuous area. If hazing or spots appear, discontinue use. Do not apply to brake parts or other zinc and cadmium-plated surfaces. Do not use on wheels with damaged clear coats.

Always read and follow precautions and usage directions before using cleaning products. Always store cleaning products out of reach of children.

*Do not use on wheels that are warm to the touch or on damaged wheels. Before use, test on an inconspicuous area. If hazing or spots appear, discontinue use. Do not apply to brake parts or other zinc and cadmium-plated surfaces. Safe on clear-coated and factory-painted wheels. Prior to use on motorcycles or uncoated, polished aluminum, check with manufacturer. Note: Do not allow wash water to enter storm drains, streams or lakes.

Usage Directions

  1. Clean one wheel at a time.
  2. Wear eye protection and rubber gloves.
  3. Wet cool wheel with hose.
  4. Hold bottle 6 inches from wheel and completely saturate wheel with cleaner.
  5. Allow foam to penetrate for 30 seconds.
  6. Wipe with a soft cloth or sponge.
  7. Thoroughly rinse wheel.
  8. Dry with a soft, clean towel to prevent water spots. Repeat if necessary.

Available Sizes

24oz. / 32oz.