A set of glossy tires is just the trick to give your vehicle a finished look. Armor All, a leader in car care, developed this revolutionary new formulation to deliver a deep rich shine that will last over 100 car washes*. The synthetic polymers bond to the rubber surface giving it exceptional durability. Plus, the formulation dries to the touch so you avoid unsightly sling.
- Lasts over 100 car washes*
- Dries completely, no sling guaranteed
*Subjected to 120 consecutive automatic car wash cycles
Tires should be clean and dry. Do not apply
over previous tire shine products. Apply in
Avoid overspray on wheels — mask off with
paper or cover with cardboard. Hold can 4″ to
6″ from tire and spray uniformly onto tire
sidewall using a quick, sweeping motion. Best
results are achieved with a light to medium
coat. Heavy coats may run and leave a white,
hazy appearance. Do not apply in windy
Use a clean towel to immediately remove
overspray from wheels or painted surfaces.
Mild solvents (e.g., rubbing alcohol) on a
clean towel may help remove overspray
residue when still wet. DO NOT ALLOW
OVERSPRAY TO DRY. As Armor All®
Outlast® Tire Glaze is a long-lasting tire
glaze, it is difficult to remove once cured.
Allow Armor All® Outlast® Tire Glaze to dry,
about 45 minutes at 70º F, longer in cooler
To avoid clogged nozzle, turn can upside
down and spray to clear nozzle after use.